LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Camry LE >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System (Diagnostic Codes (B1324-U0073 & Symptom Tests) (Except Hybrid) >> Navigation System >> DTC B15FE: XM Tuner Antenna Disconnected; DTC B15FF: XM Tuner Antenna Short [08/2015 - ] >> Procedure

DTC B15FE: XM Tuner Antenna Disconnected; DTC B15FF: XM Tuner Antenna Short [08/2015 - ]: Procedure

  1. REPLACE NAVIGATION WIRE 
    1. Replace the navigation wire with a new or known good one. Refer to REMOVAL [08/2015 - ] .
    2. Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2015 - ] .
    3. Recheck for DTCs and check that no DTCs are output.

      OK

      No DTCs are output.

    NG → See step   2 

    OK → END 

  2. REPLACE ANTENNA CORD SUB-ASSEMBLY 
    1. Replace the antenna cord sub-assembly with a new or known good one. Refer to REMOVAL [08/2015 - ] .
    2. Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2015 - ] .
    3. Recheck for DTCs and check that no DTCs are output.

      OK

      No DTCs are output.

    NG → See step   3 

    OK → END 

  3. REPLACE NO. 2 ANTENNA CORD SUB-ASSEMBLY 
    1. Replace the No. 2 antenna cord sub-assembly with a new or known good one. Refer to REMOVAL [08/2015 - ] .
    2. Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2015 - ] .
    3. Recheck for DTCs and check that no DTCs are output.

      OK

      No DTCs are output.

    NG → See step   4 

    OK → END 

  4. REPLACE NO. 3 ANTENNA CORD SUB-ASSEMBLY 
    1. Replace the No. 3 antenna cord sub-assembly with a new or known good one. Refer to REMOVAL [08/2015 - ] .
    2. Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2015 - ] .
    3. Recheck for DTCs and check that no DTCs are output.

      OK

      No DTCs are output.

    NG → See step   5 

    OK → END 

  5. REPLACE ROOF ANTENNA ASSEMBLY 
    1. Replace the roof antenna assembly with a new or known good one. Refer to REMOVAL [08/2015 - ] .
    2. Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2015 - ] .
    3. Recheck for DTCs and check that no DTCs are output.

      OK

      No DTCs are output.

    NG → See step   6 

    OK → END 

  6. REPLACE STEREO COMPONENT TUNER ASSEMBLY. Refer to  REMOVAL [08/2015 - ]