DTC B15FE: XM Tuner Antenna Disconnected; DTC B15FF: XM Tuner Antenna Short [08/2015 - ]: Procedure

REPLACE ANTENNA CORD SUB-ASSEMBLY
1. Replace the antenna cord sub-assembly with a new or known good one. Refer to REMOVAL [08/2015 - ] .
2. Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2015 - ] .
3. Recheck for DTCs and check that no DTCs are output.
  OK
  
  No DTCs are output.
NG → See step 2

OK → END
REPLACE NO. 2 ANTENNA CORD SUB-ASSEMBLY
1. Replace the No. 2 antenna cord sub-assembly with a new or known good one. Refer to REMOVAL [08/2015 - ] .
2. Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2015 - ] .
3. Recheck for DTCs and check that no DTCs are output.
  OK
  
  No DTCs are output.
NG → See step 3

OK → END
REPLACE NO. 3 ANTENNA CORD SUB-ASSEMBLY
1. Replace the No. 3 antenna cord sub-assembly with a new or known good one. Refer to REMOVAL [08/2015 - ] .
2. Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2015 - ] .
3. Recheck for DTCs and check that no DTCs are output.
  OK
  
  No DTCs are output.
NG → See step 4

OK → END
REPLACE ROOF ANTENNA ASSEMBLY
1. Replace the roof antenna assembly with a new or known good one. Refer to REMOVAL [08/2015 - ] .
2. Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2015 - ] .
3. Recheck for DTCs and check that no DTCs are output.
  OK
  
  No DTCs are output.
NG → See step 5

OK → END
REPLACE STEREO COMPONENT TUNER ASSEMBLY. Refer to REMOVAL [08/2015 - ]