Disc cannot be Ejected [08/2015 - ]: Procedure
- CHECK OPERATION
- Press the disc eject switch of the radio and display receiver assembly for 5 seconds or more and check that the disc is ejected.
OK
Disc is ejected.
NG → See step 3
OK: Go to next step
- Press the disc eject switch of the radio and display receiver assembly for 5 seconds or more and check that the disc is ejected.
- REPLACE DISC AND RECHECK
- Replace the disc with a new or known good one and check that the malfunction disappears.
OK
Disc is ejected.
NG → See step 3
OK → END (DISC WAS FAULTY)
- Replace the disc with a new or known good one and check that the malfunction disappears.
- REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY. Refer to REMOVAL [08/2015 - ]