Gateway ECU Communication Stop Mode [08/2015 - ]: Description

Detection Item	Symptom	Trouble Area
Gateway ECU Communication Stop Mode	Either condition is met: "CAN Gateway1" is not displayed on the "CAN Bus Check" screen of the Techstream. Refer to PROBLEM SYMPTOMS TABLE [08/2015 - ] Communication system DTCs (DTCs that start with U) that correspond to "Gateway ECU Communication Stop Mode" in "DTC Combination Table" are output. Refer to DIAGNOSIS SYSTEM [08/2015 - ]	Network gateway ECU branch line or connector Power source circuit of network gateway ECU Network gateway ECU ground circuit Network gateway ECU