| Combination Meter ECU Communication Stop Mode |
Either condition is met:
- "Combination Meter" is not displayed on the "CAN Bus Check" screen of the Techstream. Refer to PROBLEM SYMPTOMS TABLE [08/2015 - ]
- Communication system DTCs (DTCs that start with U) that correspond to "Combination Meter ECU Communication Stop Mode" in "DTC Combination Table" are output. Refer to DIAGNOSIS SYSTEM [08/2015 - ]
|
- Combination meter assembly main line or connector
- Power source circuit of combination meter assembly
- Combination meter assembly ground circuit
- Combination meter assembly
|