LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Camry LE >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Can Communication System (Diagnostic Codes (U0104-U1002) & Symptom Tests) (Except Hybrid) >> Can Communication System >> Symptom Tests >> Check CAN Bus Line for Short to +B [08/2015 - ] >> Description

Check CAN Bus Line for Short to +B [08/2015 - ]: Description

There may be a short circuit between one of the CAN bus lines and +B when no resistance exists between terminals 6 (CANH) and 16 (BAT) or 14 (CANL) and 16 (BAT) of the DLC3.

Symptom Trouble Area
No resistance exists between terminals 6 (CANH) and 16 (BAT) or 14 (CANL) and 16 (BAT) of DLC3.
  • Short to +B in CAN main bus line
  • Short to +B in CAN branch line
  • Network gateway ECU*1
  • ECM
  • Main body ECU (Multiplex network body ECU)
  • Combination meter assembly
  • Brake actuator assembly (Skid control ECU)
  • Steering sensor
  • Clearance warning ECU assembly*2
  • Air conditioning amplifier assembly
  • Smart key ECU assembly (Certification ECU)*3
  • Navigation receiver assembly*4
  • Radio and display receiver assembly*5
  • Power steering ECU with motor assembly*6
  • Power steering ECU assembly*7
  • Airbag sensor assembly
  • Tire pressure warning ECU and receiver*8
  • CAN No. 1 junction connector
  • CAN No. 2 junction connector