Installation [10/2014 - 10/2015]: Procedure

WARNING: This page is about a different car, the 2015 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL SEAT BELT CONTROL ECU
1. Connect the 2 connectors.
2. Install the seat belt control ECU with the nut.
  Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf)
INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
Refer to PROCEDURE - Step 12
INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY
(Refer to INSTALLATION [10/2014 - ] )