LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Avalon XLE Plus >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Service Information) (Except Hybrid) >> Hood >> Disassembly [10/2014 - ] >> Procedure

Disassembly [10/2014 - ]: Procedure

  1. REMOVE HOOD TO RADIATOR SUPPORT SEAL 
    1. Using a clip remover, disengage the 8 clips to remove the hood to radiator support seal.
      GTY582680Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE HOOD INSULATOR 
    1. Using a clip remover, remove the 7 clips.
      GTY582683Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 guides to remove the hood insulator.
  3. REMOVE WASHER NOZZLE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1

  4. DISCONNECT WASHER HOSE ASSEMBLY 
    1. Disengage the 4 clamps to disconnect the washer hose assembly.
      GTY582684Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE HOOD SUPPORT ASSEMBLY LH 

    See step  1

  6. REMOVE HOOD SUPPORT ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

scientia non olet · About LEMON Manuals