Disposal [10/2014 - ]: Procedure

DISPOSE OF HOOD SUPPORT ASSEMBLY

Horizontally hold the hood support assembly in a vise with the piston-rod pulled out.

Wear safety glasses. Gradually cut a part between A and B shown in the illustration using a metal saw to release the gas.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Area	Measurement
A-B	100 mm (3.94 in.)

NOTE:

Although the gas inside the hood support is colorless, odorless and harmless, there is a possibility that metal debris could scatter. Therefore, cover it with a piece of cloth or other material.