Removal [10/2014 - ]: Procedure

1. Disengage the 2 claws to remove the rain sensor cover as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disconnect the connector.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Release the stopper by pulling the stopper down and disconnect the rain sensor as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   TEXT IN ILLUSTRATION
   
   

   *1

   Stopper

HINT: 

• The rain sensor tape is reusable. Only replace the tape if it is damaged or contaminated.
• Check that there is no rain sensor tape residue remaining on the windshield glass. If there is, remove the residue before installing the rain sensor.