Customize Parameters [10/2014 - ]: Procedure
- CUSTOMIZE REAR SUNSHADE SYSTEM
HINT:
The following items can be customized.
NOTE:- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
- Customizing with the Techstream
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Customize Setting / Others.
- Select the setting by referring to the table below.OTHERS
Display Default Content Setting Relevant ECU Rear Shade Delay Time 0.7 s Function to change the time lag of the shift-linked operation 0.7 s, 1.2 s, 0.9 s or 0.0 s Main body ECU (Multiplex network body ECU) R-pos to Rear Sun Shade COM ON Function to lower the rear sunshade when the shift lever is moved to R with the rear sunshade raised OFF / ON