Installation [10/2015 - ]: Procedure
- INSTALL HEADLIGHT LEVELING ECU ASSEMBLY
- Engage the 2 guides to install the headlight leveling ECU assembly.
- Install the bolt.
Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
- Engage the clamp.
- Connect the connector.
- INITIALIZE HEIGHT CONTROL SENSOR SIGNAL
(Refer to INITIALIZATION [10/2014 - ] )
- ADJUST HEADLIGHT AIMING
(Refer to ADJUSTMENT [10/2015 - ] )