How To Proceed With Troubleshooting [10/2014 - ]: Procedure
- VEHICLE BROUGHT TO WORKSHOP
Result:
NEXT
See step 2
- CUSTOMER PROBLEM ANALYSIS
Result:
NEXT
See step 3
- INSPECT BASIC OPERATION
- Inspect battery voltage.
Standard Voltage
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
- Check for blown fuses, open or shorted wire harnesses, improperly connected connectors and other problems in areas that can be visually inspected.
Result:
NEXT
See step 4
- Inspect battery voltage.
- PROBLEM SYMPTOM CONFIRMATION
Result:
NEXT
See step 5
- PROBLEM SIMULATION
Result:
NEXT
See step 6
- PROBLEM SYMPTOMS TABLE
- Refer to Problem Symptoms Table (Refer to PROBLEM SYMPTOMS TABLE [10/2014 - ] ).
Result:
NEXT
See step 7
- REPAIR OR REPLACE
Result:
NEXT
See step 8
- CONFIRMATION TEST
Result:
NEXT
END