Installation [08/2015 - ]: Procedure
WARNING: This page is about a different variant/trim than selected.
- INSTALL TRANSFER POSITION SWITCH
- Attach the 3 claws to install the transfer position switch.
- INSTALL FRONT UPPER CONSOLE PANEL GARNISH
Refer to PROCEDURE - Step 4 [08/2015 - 08/2019] , or refer to PROCEDURE - Step 4 [08/2019 - ]
- INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
Refer to PROCEDURE - Step 3 [08/2015 - 08/2019] , or refer to PROCEDURE - Step 3 [08/2019 - ]