LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> 4Runner TRD Pro >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Transfer Case (VF2BM) - Service Information) >> 4WD Control Ecu >> Installation [08/2015 - 08/2019] >> Procedure

Installation [08/2015 - 08/2019]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL FOUR WHEEL DRIVE CONTROL ECU 
    1. Install the four wheel drive control ECU with the bolt.

      Torque: 13 N.m (127 kgf/cm, 9 ft.lbf) 

    2. Connect the 2 connectors.
  2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 14

  3. INSTALL INSTRUMENT PANEL BOX DOOR COVER 

    Refer to PROCEDURE - Step 15

  4. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY 

    Refer to PROCEDURE - Step 1

  5. INSTALL LOWER INSTRUMENT COVER LH 

    Refer to PROCEDURE - Step 17

  6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 18

  7. INSTALL COWL SIDE TRIM BOARD RH 

    Refer to PROCEDURE - Step 32

  8. INSTALL DOOR SCUFF PLATE ASSEMBLY RH 

    Refer to PROCEDURE - Step 34

  9. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH 

    Refer to PROCEDURE - Step 3

scientia non olet · About LEMON Manuals