Installation [08/2015 - 08/2019]: Procedure

INSTALL CENTER POWER OUTLET SOCKET COVER
1. Attach the 2 claws to install the center power outlet socket cover.
  HINT:
  
  Use the same procedure as for the other sides.
INSTALL NO. 3 POWER OUTLET SOCKET ASSEMBLY
1. Attach the claw to install the No. 3 power outlet socket assembly.
2. Attach the connector clamp.
  HINT:
  
  Use the same procedure as for the other sides.
INSTALL REAR CONSOLE END PANEL
Refer to PROCEDURE - Step 16
INSTALL NO. 1 POWER OUTLET SOCKET COVER
1. Attach the 2 claws to install the No. 1 power outlet socket cover.
INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY
1. Attach the claw to install the No. 1 power outlet socket assembly.
2. Connect the No. 1 power outlet socket assembly connector.
INSTALL REAR CONSOLE BOX ASSEMBLY
Refer to PROCEDURE - Step 1
INSTALL NO. 2 CONSOLE BOX RETAINER
Refer to PROCEDURE - Step 2
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
Refer to PROCEDURE - Step 3
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for VF2A)
Refer to PROCEDURE - Step 4
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Refer to PROCEDURE - Step 5
INSTALL FRONT NO. 2 CONSOLE BOX INSERT
Refer to PROCEDURE - Step 7
INSTALL FRONT NO. 1 CONSOLE BOX INSERT
Refer to PROCEDURE - Step 6
INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
Refer to PROCEDURE - Step 3
INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
Refer to PROCEDURE - Step 8