DTC C1419: Acceleration Sensor Internal Circuit; DTC C1435: Yaw Rate Sensor Internal Circuit [08/2015 - 08/2019]: Procedure
- REPLACE YAW RATE AND ACCELERATION SENSOR
- Replace the yaw rate and acceleration sensor (Refer to REMOVAL [08/2015 - 08/2019]
).NOTE:
Check the yaw rate and acceleration sensor signal after replacement (Refer to TEST MODE PROCEDURE [08/2015 - 08/2019] ).
Result:
NEXT
END
- Replace the yaw rate and acceleration sensor (Refer to REMOVAL [08/2015 - 08/2019]
).