LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> 4Runner TRD Pro >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System (Int) - Service Information >> ROOM LIGHT (for Rear) >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

  1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY 
    1. Using a screwdriver, detach the 4 claws and remove the No. 1 room light lens.
      GTY230553Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      Tape the screwdriver tip before use.

      TEXT IN ILLUSTRATION

      *1 Protective Tape
    2. Using a screwdriver, detach the 2 claws and 2 guides and remove the 2 No. 1 room light covers.
      GTY232858Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      Tape the screwdriver tip before use.

      TEXT IN ILLUSTRATION

      *1 Protective Tape
    3. Using a screwdriver, detach the 4 claws and disconnect the No. 1 room light assembly as shown in the illustration.
      GTY227319Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      Tape the screwdriver tip before use.

      TEXT IN ILLUSTRATION

      *1 Protective Tape
    4. Using a screwdriver, detach the 4 claws and disconnect the room light switch base from the No. 1 room light assembly.
      GTY213456Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals