LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> 4Runner TRD Pro >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System - Service Information >> Navigation Antenna >> Installation [08/2015 - 08/2019] >> Procedure

Installation [08/2015 - 08/2019]: Procedure

  1. INSTALL NAVIGATION ANTENNA ASSEMBLY 
    1. Install the antenna with the 2 screws.

      Torque: 2.5 N*m (25 kgf*cm, 22 in.*lbf) 

    2. Attach the clamp.
  2. INSTALL DEFROSTER NOZZLE ASSEMBLY 

    Refer to PROCEDURE - Step 7

  3. INSTALL NO. 3 HEATER TO REGISTER DUCT 

    Refer to PROCEDURE - Step 8

  4. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT 

    Refer to PROCEDURE - Step 9

  5. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT 

    Refer to PROCEDURE - Step 10

  6. INSTALL NO. 2 HEATER TO REGISTER DUCT 

    Refer to PROCEDURE - Step 11

  7. INSTALL NO. 1 HEATER TO REGISTER DUCT 

    Refer to PROCEDURE - Step 12

  8. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY 
    1. Install the instrument panel sub-assembly (Refer to INSTALLATION [08/2015 - 08/2019] ).
  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [08/2015 - 08/2019] ).

scientia non olet · About LEMON Manuals