Removal [12/2012 - ]: Procedure
- REMOVE OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH
*1 Moulding Remover *2 Protective Tape Put protective tape around the outer rear view mirror sub-assembly LH.
- Using a moulding remover, detach the 2 claws of the outer rear view mirror sub-assembly LH as shown in the illustration.
- Using a moulding remover, detach the 2 claws of the outer rear view mirror sub-assembly LH as shown in the illustration.
*1 Moulding Remover *2 Protective Tape - w/ Mirror Heater:
- Disconnect the connector and remove the outer rear view mirror sub-assembly LH.
- w/ Blind Spot Monitor:
- Disconnect the connector and remove the outer rear view mirror sub-assembly LH.