LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> RAV4 XLE, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System (Exterior) - Service Information - (Except Hybrid) >> Rear Light Assembly >> Reassembly [10/2015 - ] >> Procedure

Reassembly [10/2015 - ]: Procedure

  1. INSTALL REAR LIGHT GASKET LH 
    1. Install a new rear light gasket LH.
  2. INSTALL TAILLIGHT BULB (for Bulb Type Taillight) 
    1. Install the taillight bulb to the bulb socket.
      GTY582087Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Insert the bulb socket into place.
    3. Align the matchmark of the bulb socket to the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the socket.
      GTY567736Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Matchmark
      *b Unlock Position Mark
      *c Lock Position Mark
scientia non olet · About LEMON Manuals