LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> RAV4 XLE, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical (2AR-FE) (Service Information) (1 Of 2) (Except Hybrid) >> Front Crankshaft Oil Seal >> Removal [12/2012 - ] >> Procedure

Removal [12/2012 - ]: Procedure

  1. REMOVE NO. 1 ENGINE UNDER COVER 

    See step  6

  2. REMOVE REAR ENGINE UNDER COVER RH 

    See step  8

  3. DISCONNECT RADIATOR RESERVOIR ASSEMBLY 

    See step  1

  4. REMOVE FAN AND GENERATOR V BELT 

    See step  3

  5. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH 

    See step  60

  6. REMOVE CRANKSHAFT PULLEY 

    Refer to PROCEDURE - Step 18 [12/2012 - 08/2017] , or refer to PROCEDURE - Step 19 [08/2017 - ]

  7. REMOVE TIMING CHAIN COVER OIL SEAL 
    1. Using a screwdriver, pry out the oil seal.
      GTY365441Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Protective Tape
      NOTE:

      Do not damage the surface of the oil seal press fit hole or the crankshaft.

      HINT: 

      Tape the screwdriver tip before use.

scientia non olet · About LEMON Manuals