Installation [12/2012 - 08/2016]: Procedure

INSTALL FRONT SEATBACK HEATER ASSEMBLY LH

Set the front seatback heater assembly LH on the separate type front seatback cover.

Using a tacker, install the front seatback heater assembly LH to the separate type front seatback cover with 14 new tack pins as shown in the illustration.

NOTE:

Do not substitute other metal parts for tack pins.

INSTALL SEPARATE TYPE FRONT SEATBACK COVER
Refer to PROCEDURE - Step 17 [12/2012 - 10/2015] , or refer to PROCEDURE - Step 17 [10/2015 - 08/2016]
INSTALL FRONT SEAT HEADREST SUPPORT
Refer to PROCEDURE - Step 18 [12/2012 - 10/2015] , or refer to PROCEDURE - Step 18 [10/2015 - 08/2016]
INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY
Refer to PROCEDURE - Step 19 [12/2012 - 10/2015] , or refer to PROCEDURE - Step 19 [10/2015 - 08/2016]
INSTALL FRONT INNER SEAT CUSHION SHIELD LH
Refer to PROCEDURE - Step 20 [12/2012 - 10/2015] , or refer to PROCEDURE - Step 20 [10/2015 - 08/2016]
INSTALL FRONT SEAT CUSHION SHIELD LH
Refer to PROCEDURE - Step 25 [12/2012 - 10/2015] , or refer to PROCEDURE - Step 26 [10/2015 - 08/2016]
INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD LH
Refer to PROCEDURE - Step 26 [12/2012 - 10/2015] , or refer to PROCEDURE - Step 27 [10/2015 - 08/2016]
INSTALL FRONT SEAT ASSEMBLY LH
Refer to INSTALLATION [12/2012 - ]
INSPECT SEAT HEATER SYSTEM
Refer to OPERATION CHECK [12/2012 - ]