LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> RAV4 XLE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio / Video System (Service Information) (Except Hybrid) >> Instrument Panel Speaker >> Removal [12/2012 - ] >> Procedure

Removal [12/2012 - ]: Procedure

  1. REMOVE NO. 2 SPEAKER HOLE COVER 
    1. Apply protective tape as shown in the illustration.
      GTY361691Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protective Tape
    2. Using moulding remover B, detach the 2 clips, 2 claws and 2 guides and remove the No. 2 speaker hole cover.
  2. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY 
    NOTE:

    Do not touch the cone part of the speaker.

    1. Remove the 2 bolts and front No. 2 speaker assembly.
      GTY374990Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A w/ Woofer *B w/o Woofer
    2. Disconnect the connector.
scientia non olet · About LEMON Manuals