Installation [12/2012 - ]: Procedure

1. Temporarily install the transmission revolution sensor onto the transmission valve body assembly with the 2 bolts.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   Do not use a transmission revolution sensor that has been dropped.

2. Tighten the 2 bolts in the order shown in the illustration above.

   Torque: 10.8 N*m (110 kgf*cm, 8 ft.*lbf) 

3. Connect the connector of the transmission revolution sensor.

Refer to INSTALLATION [12/2012 - ]