Installation [12/2012 - 08/2016]: Procedure

INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

Install the front seat inner belt assembly LH with the nut.

Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTE:

Do not allow the anchor of the front seat inner belt assembly LH to overlap the protruding part of the separate type front seat cushion spring assembly.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*1	Protruding Part

Return the separate type front seat cushion cover to its original position.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Connect each connector and each clamp.

INSTALL FRONT SEAT INNER BELT ASSEMBLY RH

for Type A:

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*1	Protruding Part

Install the front seat inner belt assembly RH with the nut.
Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTE:
Do not allow the anchor of the front seat inner belt assembly RH to overlap the protruding part of the separate type front seat cushion spring assembly.
Attach the guide to install the limit switch of the front seat inner belt assembly RH.
Install the screw.

for Type B:

*1	Protruding Part

Install the front seat inner belt assembly RH with the nut.
Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTE:
Do not allow the anchor of the front seat inner belt assembly RH to overlap the protruding part of the separate type front seat cushion spring assembly.

Return the separate type front seat cushion cover to its original position.

Connect each connector and each clamp.
Attach the 2 guides and 2 claws to install the front set inner cushion shield RH.

INSTALL FRONT SEAT ASSEMBLY
1. for Manual Seat:
  Refer to INSTALLATION [12/2012 - 08/2016]
2. for Power Seat:
  Refer to INSTALLATION [12/2012 - ]