Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
[OFF malfunction]
- One of the following conditions is met: OFF malfunction (A), (B) or (C)OFF MALFUNCTION (A)
Turbine speed - Output speed x 3rd gear ratio 1000 rpm or more OFF MALFUNCTION (B)Turbine speed - Output speed x 5th gear ratio 1000 rpm or more OFF MALFUNCTION (C)Turbine speed / Output speed when output speed less than 1000 rpm 3.232 to 7.556
[ON malfunction]
- Both of the following conditions are met: ON malfunction (A), (B) or (C) and ON malfunction (D)
2 detections are necessary per driving cycle:
1st detection: temporary flag ON
2nd detection: pending fault code ON
ON MALFUNCTION (A) AND (B)Turbine speed / Output speed when output speed less than 1000 rpm 1.369 to 1.613 ON MALFUNCTION (C)Turbine speed / Output speed when output speed less than 1000 rpm 0.690 to 0.818 ON MALFUNCTION (D)Turbine speed / Output speed when output speed less than 1000 rpm 0.976 to 1.113