Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
ALL
| The monitor will run whenever the following DTCs are not stored | None |
| Battery voltage | 8 V or higher |
| Ignition switch | ON |
| Starter | OFF |
P2769: RANGE CHECK (LOW RESISTANCE)
| Shift solenoid valve SL | ON |
| Time after solenoid OFF to ON | 0.008 sec. or more |
P2770: RANGE CHECK (HIGH RESISTANCE)
| Shift solenoid valve SL | OFF |
| Time after solenoid ON to OFF | 0.008 sec. or more |