Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
- One of the following conditions is met: Condition (A), (B) or (C)
Condition (A)
Any two of the following conditions are met: Conditions 1, 2 and 3 1. One of the following conditions is met: Conditions (a), (b) or (c) (a). P position switch ON (b). N position switch ON (c). Park/neutral position switch (NSW) ON 2. R position switch ON 3. D position switch ON
Condition (B)
- All of the following conditions are met
P position switch OFF N position switch OFF Park/neutral position switch (NSW) OFF R position switch OFF D position switch OFF
Condition (C)