LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> RAV4 SE, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Transfer Case (Service Information)) >> 4WD Control Switch >> Removal [12/2012 - ] >> Procedure

Removal [12/2012 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE NO. 2 SWITCH HOLE BASE 

    Refer to PROCEDURE - Step 6

  2. REMOVE DIFFERENTIAL LOCK SWITCH 
    1. Detach the 2 claws and remove the differential lock switch.
      GTY364759Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the connector.
scientia non olet · About LEMON Manuals