LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> RAV4 SE, FWD >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake (Service Information) (Except Hybrid) >> Parking Brake Switch >> Installation [12/2012 - ] >> Procedure

Installation [12/2012 - ]: Procedure

  1. INSTALL PARKING BRAKE SWITCH ASSEMBLY 
    1. Install the parking brake switch with the screw.

      Torque: 0.9 N*m (9 kgf*cm, 8 in.*lbf) 

    2. Connect the parking brake switch connector.
  2. INSPECT BRAKE WARNING LIGHT 
    1. Operate the parking brake lever and check the illumination condition of the brake warning light.

      OK

      The brake warning light always illuminates at the first click.

  3. INSTALL REAR CONSOLE BOX ASSEMBLY 

    Refer to INSTALLATION [12/2012 - 10/2015] Refer to INSTALLATION [10/2015 - ]

scientia non olet · About LEMON Manuals