LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> RAV4 SE, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission (U760E) - Service Information (1 Of 2)) >> Combination Switch >> Installation [12/2012 - 10/2015] >> Procedure

Installation [12/2012 - 10/2015]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL COMBINATION SWITCH ASSEMBLY 
    1. Attach the 2 claws to install the combination switch assembly.
  2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 12

  3. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 2

  4. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 7

  5. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 8

  6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 9

scientia non olet · About LEMON Manuals