| U0100 |
Lost Communication with ECM / PCM "A" |
Both conditions are met:
- IG voltage is 10.5 V or higher.
- No communication with the ECM continues for 2 seconds or more.
|
- ECM
- CAN communication system
- Combination meter assembly
|
| U0129 |
Lost Communication with Skid Control ECU |
Both conditions are met:
- IG voltage is 10.5 V or higher.
- No communication with the brake actuaror assembly (skid control ECU) continues for 3 seconds or more.
|
- Brake actuator assembly (skid control ECU)
- CAN communication system
- Combination meter assembly
|
| U0131 |
Lost Communication with Electric Power Steering ECU |
Both conditions are met:
- IG voltage is 10.5 V or higher.
- No communication with the power steering ECU assembly continues for 3 seconds or more.
|
- Power steering ECU assembly
- CAN communication system
- Combination meter assembly
|
| U0142 |
Lost Communication with Main Body ECU |
Both conditions are met:
- IG voltage is 10.5 V or higher.
- No communication with the main body ECU (multiplex network body ECU) continues for 3 seconds or more.
|
- Main body ECU (Multiplex network body ECU)
- CAN communication system
- Combination meter assembly
|
| U0151 |
Lost Communication with Airbag ECU |
Both conditions are met:
- IG voltage is 10.5 V or higher.
- No communication with the airbag sensor assembly continues for 10 seconds or more.
|
- Airbag sensor assembly
- CAN communication system
- Combination meter assembly
|