Installation [10/2015 - ]: Procedure

1. Connect the 2 connectors to the 2 transmission shift switch assemblies.
2. Install 2 new cable ties as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *1	Cable Tie
   *a	0 to 40°
   *b	1 to 3 mm (0.0394 to 0.118 in.)

3. Attach the 6 guides to install the No. 1 switch wire.
4. Attach the 4 pins and install the 2 transmission shift switch assemblies to the steering wheel boss lower cover.

Refer to INSTALLATION [10/2015 - ]