DTC C1626: Steering Angle Sensor Failure [10/2015 - ]: Procedure

1. Replace the spiral with sensor cable sub-assembly.

   Refer to REMOVAL [12/2012 - ]

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  2

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [10/2015 - ]

2. Check for DTCs.

   Refer to DTC CHECK / CLEAR [10/2015 - ]

   Result

   Result	Proceed to
   DTC C1626 is not output	A
   DTC C1626 is output	B

Result:  1

A 

END (SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY IS DEFECTIVE) 

Result:  2

B 

REPLACE TELEVISION CAMERA ASSEMBLY. Refer to  REMOVAL [10/2015 - ]