LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Prius V Three >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Testing and Diagnosis >> Hybrid Control System - (Diagnostic Codes) (P0069-273 - P0A40-549) >> Hybrid Control System >> DTC P0A1A-166: Generator Control Module [08/2015 - ] >> Inspection Procedure

Inspection Procedure

HINT: 

After the repair, clear the DTCs and perform the following procedure to check that DTCs are not output.

  1. Turn the power switch on (READY).
  2. With the vehicle stopped and park (P) selected, depress the accelerator pedal and start the engine.
  3. Depress the accelerator pedal and keep the engine running for 30 seconds or more.
scientia non olet · About LEMON Manuals