Removal [12/2018 - ]: Procedure

REMOVE FRONT WHEEL
Refer to PROCEDURE - Step 1
REMOVE NO. 1 ENGINE UNDER COVER
Refer to PROCEDURE - Step 6 [12/2018 - 07/2020] , or refer to PROCEDURE - Step 6 [07/2020 - ]
REMOVE REAR MOTOR UNDER COVER LH
Refer to PROCEDURE - Step 7 [12/2018 - 07/2020] , or refer to PROCEDURE - Step 7 [07/2020 - ]

SEPARATE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

Remove the bolt and 2 nuts and separate the front lower No. 1 suspension arm sub-assembly LH from the front lower ball joint assembly LH.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

Remove the 2 bolts, nut and front lower No. 1 suspension arm sub-assembly LH from the front suspension crossmember sub-assembly.

NOTE:

Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.