LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Prius Two >> Repair and Diagnosis >> External Pages >> Different car >> Section 267 (Supplemental Restraint System - Diagnostic Codes (B1160-B1656) (Except Hybrid)) >> AIRBAG SYSTEM (for Gasoline Model) >> DTC B162A: Side Airbag Sensor Assembly No. 2 (RH) [04/2018 -] >> Description

DTC B162A: Side Airbag Sensor Assembly No. 2 (RH) [04/2018 -]: Description

WARNING: This page is about a different car, the 2022 Toyota Avalon, 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

The side collision sensor RH circuit (bus 2) consists of the airbag ECU assembly and side No. 1 airbag sensor RH.

The side No. 1 airbag sensor RH detects impacts to the vehicle and sends signals to the airbag ECU assembly to determine if the airbags and pretensioners should be deployed.

DTC B162A is stored when a malfunction is detected in the side No. 1 airbag sensor RH.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Test Mode / Check Mode
B162A Side Airbag Sensor Assembly No. 2 (RH)
  • Side No. 1 airbag sensor RH malfunction
  • Airbag ECU assembly malfunction
  • Side No. 1 airbag sensor RH
  • Airbag ECU assembly
Comes on Does not apply to test/check mode