LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Prius C Two >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge System - Diagnostics - Introduction >> Meter / Gauge System >> Customize Parameters [11/2015 - 06/2017] >> Procedure

Customize Parameters [11/2015 - 06/2017]: Procedure

  1. CUSTOMIZE METER / GAUGE SYSTEM 
    1. Customizing with the Techstream
      1. Connect the Techstream to the DLC3.
      2. Turn the ignition switch to ON (IG).
      3. Turn the Techstream on.
      4. Enter the following menus: Customize Setting / Warning.
      5. Select the setting by referring to the table below.
        NOTE:
        • Be sure to record the current value before customizing.
        WARNING

        Tester Display Default Content Setting Relevant ECU
        Key Remind Sound Slow Function to change the cycle of the key remind warning buzzer Normal, Slow, Fast Combination meter assembly
        Driver Side Seatbelt Warning Buzzer ON Function to turn on/off the seat belt warning buzzer ON or OFF Combination meter assembly
        Front Passenger Side Seatbelt Warning Buzzer ON Function to turn on/off the seat belt warning buzzer ON or OFF Combination meter assembly
scientia non olet · About LEMON Manuals