LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Prius C One >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission Control System (Service Information) >> Vacuum Sensor >> Installation [11/2015 - ] >> Procedure

Installation [11/2015 - ]: Procedure

  1. INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR 
    1. Install the manifold absolute pressure sensor with the bolt.

      Torque: 7.1 N*m (72 kgf*cm, 63 in.*lbf) 

    2. Connect the connector.
  2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY 
    1. Install the air cleaner case sub-assembly with the 2 bolts and grommet.

      Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf) 

    2. Install the air cleaner filter element sub-assembly.
  3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 2

scientia non olet · About LEMON Manuals