Initialization [11/2015 - 06/2017]

HINT: 

The ODO/TRIP change switch is located on the right side of the steering pad switch assembly.

1. Turn the ignition switch to ON (IG).
2. Press the ODO/TRIP change switch until the ODO meter appears.
3. Turn the ignition switch off.
4. Turn the ignition switch to ON (IG). The multi-information display's initial screen will be displayed for a few seconds. While the initial screen is being displayed, press the ODO/TRIP switch 3 times, pressing and holding the ODO/TRIP change switch on the third times. Hold the ODO/TRIP change switch until the following conditions are met and 5 seconds have elapsed.
   1. The ODO meter shows "000000".
   2. The multi-information display shows that the reset is complete.