Caution / Notice / Hint
NOTE:
- After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
Refer to PRECAUTION [06/2015 - ]
- When disconnecting the cable from the negative (-) auxiliary battery terminal while performing repairs, some systems need to be initialized after the cable is reconnected.
Refer to INITIALIZATION [06/2015 - 11/2018] , or refer to INITIALIZATION [11/2018 - ]
- After replacing the airbag sensor assembly, refer to initialization.
Refer to INITIALIZATION [06/2015 - 11/2018] , or refer to INITIALIZATION [11/2018 - ]
- Inspect the fuses for circuits related to this system before performing the following inspection procedure.
- When replacing the combination meter assembly, make sure to replace it with a new one.