LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Mirai >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System - Diagnostic Codes (2 Of 2) & Circuit Tests >> Electronically Controlled Brake System >> DTC C1345-66: Linear Solenoid Valve Offset Learning Undone; DTC C1368-67: Linear Solenoid Valve Offset Malfunction [06/2015 - ] >> Description

DTC C1345-66: Linear Solenoid Valve Offset Learning Undone; DTC C1368-67: Linear Solenoid Valve Offset Malfunction [06/2015 - ]: Description

The skid control ECU (brake booster with master cylinder assembly) stores and corrects the individual differences in the brake pedal stroke sensor assembly, actuator solenoids, and stroke simulator solenoid. Perform initialization and calibration of the linear solenoid valve if any of these parts is replaced.

The skid control ECU (brake booster with master cylinder assembly) receives the shift position P signal from the EV control ECU through the CAN communication system.

These DTCs are cleared when the linear valve offset learning results are normal.

DTC No. Detection Item INF Code DTC Detection Condition Trouble Area Note
C1345/66 Linear Solenoid Valve Offset Learning Undone - Linear valve offset learning undone. Perform linear valve offset learning and check for DTCs. If no DTCs are output again, the valve is normal. Electronically controlled brake system DTC
C1368/67 Linear Solenoid Valve Offset Malfunction - Offset learned value out of specification.
  • Perform linear valve offset learning and check for DTCs. If no DTCs are output again, the valve is normal.
  • Brake actuator (Brake booster with master cylinder assembly)
Electronically controlled brake system DTC