Problem Symptoms Table [06/2015 - ]
HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
CLOCK SYSTEM
| Symptom | Suspected Area | Link |
|---|---|---|
| Clock does not operate at all | Harness or connector | - |
| Combination meter assembly | Refer to REMOVAL [06/2015 - 11/2018] , or refer to REMOVAL [11/2018 - ] | |
| Clock display illumination malfunction | Harness or connector | - |
| CAN communication system | Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2015 - 11/2018] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - ] | |
| Refer to "Operating Light Control Rheostat does not Change Light Brightness" | Refer to Operating Light Control Rheostat does not Change Light Brightness [06/2015 - ] | |
| Main body ECU (multiplex network body ECU) | Refer to REMOVAL [06/2015 - 11/2018] , or refer to REMOVAL [11/2018 - ] | |
| Combination meter assembly | Refer to REMOVAL [06/2015 - 11/2018] , or refer to REMOVAL [11/2018 - ] | |
| Clock loses or gains time | Combination meter assembly | Refer to REMOVAL [06/2015 - 11/2018] , or refer to REMOVAL [11/2018 - ] |
| Clock cannot be adjusted | Combination meter assembly | Refer to REMOVAL [06/2015 - 11/2018] , or refer to REMOVAL [11/2018 - ] |