LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander XLE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Automatic Transmission (UA80E) - Diagnostic Codes (2 Of 3)) >> Automatic Transaxle System >> DTC U0100-87: Lost Communication with ECM/PCM "A" Missing Message [11/2016 - ] >> Description

DTC U0100-87: Lost Communication with ECM/PCM "A" Missing Message [11/2016 - ]: Description

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

The engine control unit and transmission control unit are located inside the ECM. The engine control unit intercommunicates with the transmission control unit using CAN communication.

If there is a problem in this intercommunication, the ECM stores this DTC.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
U010087 Lost Communication with ECM/PCM "A" Missing Message 1. Diagnosis Condition 2. Malfunction Status 3. Malfunction Time 4. Other
  1. The ignition switch is ON and battery voltage is 9.5 V or more.
  2. No intercommunication between engine control unit and transmission control unit
  3. 1.25 seconds or more
  4. 1-trip detection logic
ECM Comes on DTC stored SAE Code: U0100