Initialization [12/2013 - 11/2016]

HINT: 

Models with Maintenance Required Reminder Function.

1. for Multi-information Display (Monochrome Type)
   1. Turn the ignition switch to ON.
   2. Press the ODO/TRIP switch knob until the TRIP A meter appears.
   3. Turn the ignition switch off.
   4. Turn the ignition switch to ON while pressing and holding the ODO/TRIP switch knob. Hold the ODO/TRIP switch knob until the following conditions are met and 5 seconds have elapsed.
   5. The TRIP A meter shows "000000".
   6. The multi-information display shows that the reset is complete.
2. for Multi-information Display (Color Type)
   1. Turn the ignition switch to ON.
   2. Using the steering pad switch assembly, display the setting display on the multi-information display.
   3. Select "Maintenance System" from the setting display and perform initialization according to the multi-information display.