LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander XLE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System (Exterior) - Service Information - (Except Hybrid) >> Side Turn Signal Light Assembly >> Inspection [12/2013 - ] >> Procedure

Inspection [12/2013 - ]: Procedure

  1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH 
    1. Apply battery voltage to the side turn signal light assembly LH and check that the light comes on.
      GTY449714Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Side Turn Signal Light Assembly LH)

      OK

      Condition Specified Condition
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 2      		 Side turn signal light LH comes on

      If the result is not as specified, replace the side turn signal light assembly LH.

  2. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH 
    1. Apply battery voltage to the side turn signal light assembly RH and check that the light comes on.
      GTY449714Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Side Turn Signal Light Assembly RH)

      OK

      Condition Specified Condition
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 2      		 Side turn signal light RH comes on

      If the result is not as specified, replace the side turn signal light assembly RH.

scientia non olet · About LEMON Manuals