LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander XLE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System (Exterior) - Service Information - (Except Hybrid) >> High Mounted Stop Light Assembly >> Inspection [12/2013 - ] >> Procedure

Inspection [12/2013 - ]: Procedure

  1. INSPECT CENTER STOP LIGHT ASSEMBLY 
    1. Apply battery voltage to the center stop light assembly and check that the light comes on.
      GTY449780Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Center Stop Light Assembly)

      OK

      Condition Specified Condition
      Battery positive (+) → Terminal 1 (B)
      Battery negative (-) → Terminal 2 (E)      		 Center stop light comes on

      If the result is not as specified, replace the center stop light assembly.

scientia non olet · About LEMON Manuals