LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander XLE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System (Exterior) - Service Information - (Except Hybrid) >> Headlight Assembly >> Reassembly [11/2016 - ] >> Procedure

Reassembly [11/2016 - ]: Procedure

  1. INSTALL FRONT SIDE MARKER LIGHT BULB 
    1. Install the front side marker light bulb to the headlight cord.
    2. Turn the headlight cord with the front side marker light bulb as shown in the illustration to connect them as a unit.
      GTY696404Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT TURN SIGNAL LIGHT BULB 
    1. Install the front turn signal light bulb to the headlight cord.
    2. Turn the headlight cord with the front turn signal light bulb as shown in the illustration to connect them as a unit.
      GTY733075Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL NO. 2 HEADLIGHT BULB 
    1. Turn the No. 2 headlight bulb as shown in the illustration to install it.
      GTY696401Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Do not touch the bulb glass.

    2. Connect the connector.
      GTY733074Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Turn the back cover assembly as shown in the illustration until the lock marks are aligned to install it.
      GTY728198Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Lock Mark
  4. INSTALL NO. 1 HEADLIGHT BULB 
    1. Turn the No. 1 headlight bulb as shown in the illustration to install it.
      GTY696406Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Do not touch the bulb glass.

scientia non olet · About LEMON Manuals