LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Limited, FWD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension (Service Information) (Except Hybrid) >> Front Shock Absorber >> Disposal [12/2013 - 11/2015] >> Procedure

Disposal [12/2013 - 11/2015]: Procedure

  1. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY 
    1. Fully extend the front shock absorber assembly.
    2. Using a drill, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.
      GTY373168Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      WARNING:

      Always use proper safety equipment and be careful when drilling because shards of metal may fly about.

      HINT: 

      The gas is colorless, odorless and non-poisonous.

scientia non olet · About LEMON Manuals